Designed for use with our heating systems, this cartridge type filter utilizes a reusable single element, reinforced polyester filter cartridge to provide a high degree of water clarity with minium care.
|Deck Mounted Manual Fill Faucet
Chrome plated, single valve faucet. Can be easily mounted at any desired location on rim. For 1/2" connections.
|Flush port Manual Fill Valve
Attractive flush port with brass fill valve, operated from behind baptistry. Uses 3/4" connections.
|All New EQAS Auto Fill System
Turn this unit on and an electric fill valve opens to fill the baptistry, then closes when baptistry is full. If left on, the system will cycle on and off to maintain proper water level. For use with the new EQAS H Series Heaters.
|Manual Drain Unit
Our most economical drain system, this unit includes chrome plated fittings, an overflow with a mechanical trip lever, and all necessary fittings for installation.
|Deluxe Manual Drain
Unique "Free flow" design uses an external cable linkage. Highest quality machined fittings assure a positive seal to prevent seepage. Drain is activated by an attractive rotating knob on the overflow fitting.
Place these fiberglass landings at the top of your baptistry steps to catch dripping water from wet robes.
Removable step raises short children 12" for visibility. Includes toe-hold bar and suction cups for attachment.
|Seat / Platform
This versatile accessory can be used as a step for children or as a platform / seat for adults who wish to be baptized from a seated position. Includes toe-hold bar and suction cups attachment.
Lower the sanctuary lights and revel in the brilliant presence of the baptismal pool by incorporating FSI Baptistry Lights into your design. The pool lights are made with high quality stainless steel housing and face rings for long term beauty and durability. The tempered glass lenses provide uniform light diffusion. Each light comes with additional red and blue snap on lens covers.
|Pool Alarm System
The PP30 is a deluxe alarm with an electronic solid state remote receiver. An alarm will sound both in your baptismal pool and on the remote receiver up to a distance of approximately 200 feet. The remote receiver has an on/off switch with an "on" indicator light and is powered by a 120 volt A.C. wall transformer. The alarm in the baptismal pool is battery powered and uses one 9 volt alkaline battery (battery not included).
Our standard baptistries are made with the highest quality and finish available in the industry. To preserve this finish we recommend that the baptistry be drained after each use and left empty until needed. Leaving water standing in the baptistry for extended periods may damage the gel-coat surface.
For those churches who plan to leave the baptistry filled for extended periods, we recommend our "AquaGuard" finish option. This special process provides an extra level of protection against blistering and spotting caused by prolonged water contact.
We guarantee baptistries purchased with the AquaGuard Finish option against surface blistering, peeling, or cracking for five (5) years when installed and maintained according to instructions.
Available as an option on most baptistries, this 12" Plexiglas window allows better viewing of the baptism. This is especially helpful if the baptistry is elevated above ground level.
The sturdy, 1/2" Plexiglas window is shipped in protective paper, with silicone sealant for installation by your contractor. We recommend installing the window last, to prevent possible damage.
Series 2000 baptistries feature an improved window system, making installation practically foolproof. Window Installation Instructions